Methods to sew on badges by hand or by machine

When you want to liven up a piece of clothing, accessory, luggage piece or even hats you can easily sew on badges to obtain the fresh look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky in just a few minutes. When you’ve got children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult once you know the right way to get it done.

To start this procedure for sewing on a badge, begin with placing the badge to the place in which you desire it. Now secure the badge well with pins so that it stays in place and doesn’t shift when you’re sewing it on. If you happen to be putting the patch over a garment, you have to fix the patch after which try the garment on to be certain that the patch or the badge looks right in the place. If your patch requires a little readjustment it can be done at this point easily.

Now thread the needle ensuring that the thread that you are using isn’t too long. Maintain the thread on a length of approximately 18inches for easy maneuvering. If your thread is way too long then you might get bothered by knots. When you have the thread ready make a knot at the end of the thread. It is possible to thread a needle by hand by holding the non knotted end in between your forefinger and thumb and then passing it in the eye of your needle. It’s also possible to get the aid of a needle threader if you find threading a needle like this difficult.

Pass the needle in the badge and the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you began stitching keeping this distance from the last stitch all the time. Continue stitching surrounding the entire perimeter of the badge until you have finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by using a single stitch. Pull the thread securely to secure the knot after which you can cut-off any excess thread that’s left. Lastly take off the excess safety pins that you were using to secure the patch into position.

You may as well sew on badges with the assistance of a sewing machine in case you don’t wish to do the same by hand. Choose a thread that matched the hue of your patch and then tread your machine. You may also pick a contrasting color with regards to the look which you want to give your badge. Once this is successfully done you need to start sewing you badge. Take advantage of the top of the badge as your kick off point and sew all across the edge of your badge utilizing the regular stitch mode ending at your start line. Once done, cut the extra thread that connects the badge to the machine and your garment is ready for use together with the badge.

Be the first to comment

Leave a Reply